I have an old model single six with magnum cylinder, 5 1/2' barrel, roll marked Ruger.22 cal. Single-six, s/n 428232 that falls into serial. Ruger new model single six serial numbers, ruger ser numbers year made, ruger single six date of manufacture, ruger single six serial dates, ruger single six serial number history.

These guns had a 5-1/2 inch barrel, a steel cylinder frame, three cylinder frame screws, fixed drift adjustable rear sight, fluted.22 caliber cylinder ( long rifle, long, or short ), flat cartridge loading gate, small serrated ejector rod button, alloy Colt-style XR3 black anodized grip frame, and Black checkered hard rubber grip panels with the trademark Black Eagle medallions. These early production guns are known today as “Flatgates”. Early on in the Single-Six production, stag and ivory grip panels with the Ruger Black Eagle logo could be purchased from the factory for $8.50 and $16.50, respectively. Varnished Walnut grips later became available around 1955 for $5.00. These varnished Walnut grips actually became the standard about 1960 with the Black checkered hard rubber grips still available but costing $1.00 less. The ivory grips were dropped from the catalogs about 1958 and the stags were dropped when the grip fame was redesigned in 1962.

&.22 Magnum) cylinders, early XR3 marked black anodized grip frame, Black checkered hard rubber or varnished Walnut grips, 4-5/8”, 5-1/2” and 9-1/2” barrels. Roundgate, dual (.22 cal. &.22 Magnum) cylinders, the later redesigned XR3-RED marked black anodized grip frame, oil filled Walnut grips, 4-5/8”, 5-1/2”. 6-1/2” and 9-1/2” barrels. As you can see from the above, you would need to collect several guns in order to have a representative of each of these major types and variations listed for this revolver.

6-1/2” and 9-1/2” barrels. As you can see from the above, you would need to collect several guns in order to have a representative of each of these major types and variations listed for this revolver. It is a challenge to find these in top collectable condition since these guns were considered “working guns” and most were used extensively. There are numerous additional variations of the Single-Six that the collector can move into. For instance, there are four distinct variations of the “Flatgate” alone. I will not attempt to try and cover them and other variations here. This will require considerable study by the beginning collector to understand the make up of these guns and what to look for.

So my questions are: 1. Was thinking of touching up the worn bluing and possibly sanding out the dings and scratches on the grip frame, then polishing it. Would this hurt or improve the value.

I will also list some of the major types and variations of these guns. I hope these articles will be interesting for the readers and especially the beginning Ruger collectors – and hopefully they will influence some of you to begin to collect Rugers. I must give credit for much of my Ruger knowledge to my many collector friends from whom I have learned so much over the years. Without them I would not have been able to even attempt to pen these articles. A hearty thanks to Rich Machniak, Jim Schafer, Lee Newton, John Dougan, Mike Stewart, Chad Hiddleson, Don Findley, John Krukenberg, Ken Sawyers, Bob Campbell, Allen Daniels, Dale Dalbotten, Carl Laco, Lee Sundermeier, Henry Bone, Budd Given, and the host of others that I have failed to name who have shared your knowledge with me – and a lot of good Rugers that you allowed me to purchase! Also much of my knowledge came from the RCA Journals, Red Eagle News Exchange (RENE), and the other fine books that are listed on this web-site as suggested reference materials on collecting Rugers (see Bill's article at ).

Sent from my iPad using Tapatalk. That's an excellent example and one that would have some collectors very interested. Another possibility and one I'm starting to think is most likely is that your example is from 1968. The RENE Reference mentions that a block of 1400 RSS5X duplicate serial number Single Six convertibles were released in 1968 and are in the general serial number range D500000 to D505140.

By reading on your own and then handling examples of these fine guns you will learn faster and have a much clearer understanding of these guns and their many variations. I would appreciate any better or updated information, additional noted variations, corrections or just general comments regarding these articles. I am still learning more about these guns and their variations every day.

In 1973, Ruger discontinued what is now called the Old Model Single-Six and introduced the New Model, which featured a transfer bar. This Old Model Single-Six is in 98 percent condition, with very little muzzle and ejector rod housing wear. What could be mistaken for pinprick pitting is actually imperfection in the casting.

Conia ykr f 06 manual saab. Bill Hamm Got something to say about this article? Want to agree (or disagree) with it? Click the following link to go to the. The Ruger Owners & Collectors Society is an active organization for all Ruger Owners, Shooters and Collectors. Annual Membership includes a ROCS Logo Brassard, the latest Digest Magazine and an invitation to ROCS events. There will be two Digest magazines published every year.

I must give credit for much of my Ruger knowledge to my many collector friends from whom I have learned so much over the years. Without them I would not have been able to even attempt to pen these articles. A hearty thanks to Rich Machniak, Jim Schafer, Lee Newton, John Dougan, Mike Stewart, Chad Hiddleson, Don Findley, John Krukenberg, Ken Sawyers, Bob Campbell, Allen Daniels, Dale Dalbotten, Carl Laco, Lee Sundermeier, Henry Bone, Budd Given, and the host of others that I have failed to name who have shared your knowledge with me – and a lot of good Rugers that you allowed me to purchase! Also much of my knowledge came from the RCA Journals, Red Eagle News Exchange (RENE), and the other fine books that are listed on this web-site as suggested reference materials on collecting Rugers (see Bill's article at ). They are worth their weight in gold when it comes to building your collection. There are many advanced Ruger collectors that could easily add much more to these writings.

Ruger Single-Six with 9.5-inch Barrel Type Place of origin United States Production history Designer Designed 1953 Manufacturer Sturm, Ruger Unit cost $534 -754 () Produced 1953 - present Specifications Weight 32-40 Length 10¼ - 15 inches length 4⅝, 5½, 6½, 7½, 9½ inches,,, Barrels 6- Feed system 6-round Sights Fixed or adjustable (the Hunter model has provisions for mounting a ) The Ruger Single-Six is a single action produced. The Single-Six was first released in June 1953.

Also, within a model family the same serial number prefix may be used to produce a variety of different models, all in the same block of serial numbers. And in some cases, firearms may be stored for a length of time before they are shipped. For details on your specific serial number you may contact our Service Department: 336-949-5200 For serial numbers manufactured prior to our electronic records, or for an official letter confirming the details on your firearm please download and mail in the form.

Ruger made several changes in their single action revolvers in 1962/63. Three of the most notable changes were the new redesigned black anodized grip frame (marked XR3-RED) versus the original XR3 grip frame, the change to oil filled Walnut grips versus varnished Walnuts, and an aluminum alloy ejector rod housing versus the steel housing. The 6-1/2 inch barrel length was added to the standard Single-Six line around late 1962/ early 1963. Thus these gun were available in four barrel lengths ( 4-5/8”, 5-1/2”, 6-1/2”, and 9-1/2” ) from about 1962/63 until the end of old model or “three screw “ production in 1972. The 9-1/2” and 4-5/8” are the most scarce.